Jeep Central
From Jeep History to Tech Specs and Projects.  This section is all about Jeeps.
Jeep Technical Info
▫ Engines
▫ Transmissions
▫ Transfercases
▫ Axles
▫ Engine Swaps
 

Powertrax No-Slip Differential Installation Guide

Contents

• IMPORTANT INFORMATION Please Read Carefully
• Open Differential Part Identification & Terminology
• Powertrax No-Slip Differential Exploded View
• Vehicle Preparation for Installation (steps 1 to 5)
• Removal of Open Differential Parts (steps 6 to 11)
• Preparation of Parts to be Installed (steps 12 to 13)
• Assembly (steps 14 to 37)
• Verification of Proper Assembly Test (steps 38 to 42)
• Finish Installation (steps 43 to 47)

Vehicle Preparation for Installation (steps 1 to 5)

Next >

The above information is provided by Richmond Gear.  These instructions are the instructions we followed during our installation of the Powertrax No-Slip Differential in a 30 spline Dana 44 Axle.  These instructions are posted for educational purposes only and are not meant to be THE instructional guide to installing the Powertrax No-Slip Differential, rather as a review of the process transcribed into an HTML format.  Please refer to Richmond Gear for your application of the Powertrax No-Slip Differential as well as many other great products.  Source: Richmond Performance Products, 822 1003 A, Open Differential Integral Carrier Non C-Clip Version

Richmond Performance Products • 1208 Old Norris Road • P.O. Box 238 • Liberty, S.C. 29657
Phone: 864-843-9231 • Fax: 864-843-2964 On the web at: www.richmondgear.com