Glenn decided to add a set
of twin sticks (a) to his new Dana 300 which is a good idea if you like choice. This shifter by Currie
allows a lot of freedom of gear selection to the driver. The shifters
allow combinations not possible with the stock Jeep shifter. It allows for
2Low, Front WD Low, 4Lo, 4Hi, 2Hi not to mention more levers in the driver
compartment to add to the neato factor. The shifter allows for lots of
adjustment for perfect positioning.
The next step was to remove
the old case from Glenn's Jeep. The oil was drained, the drive shafts and
4wd shifter were disconnected, and also removed the speedometer cable. Soon
after the case was out on the floor. (b)
The new case was positioned
under the Jeep and we hoisted it up and bolted it in. (c) Glenn looks
happy under there doesn't he? (d) We hooked up the drive shafts, speedometer
cable, installed oil, and adjusted the twin sticks.
Onboard
Air
Home-built
Serious Skid-Plate protection for the Oil Pan for under 20 bucks!
