Main >>
Transmission >>
Identification >>
IH >> CrossReferenceInternational Harvester truck fans are big into line setting
tickets. A line setting ticket identifies all the parts that were used
to build the original truck. The line setting ticket uses special IH
codes to identify these parts and this table has been compiled to
cross reference those codes with the manufactures model number. If you
purchase an IH truck it may come with a line setting ticket or you
could still purchase the line setting ticket for your truck. The line
setting ticket may still be in the glove box or behind the glove box.
Some confusion can be generated by the IH codes because the numbers
seem similar to model numbers used by the manufacture. For example, a
transmission with the IH T-14 designation is different from Borg-Warners
T-14, the IH T-14 is a T-90.
| IH Code |
Vendor and Model |
When Used |
| 13013 or T-13 |
Warner Gear T-90, 3 Speed |
2WD, Scout 80, 800, and II thru '74 |
| 13014 or T-14 |
Warner Gear T-90, 3 Speed |
4WD Scout 80, 800, and II thru '74 |
| 13039 or T-39 |
Borg Warner 11 Automatic |
Scout 800 and II thru '72 |
| 13044 or T-44 |
Warner Gear T-18 4 Speed |
2WD Scout 800 and II thru '75 |
| 13045 or T-45 |
Warner Gear T-18, 4 Speed |
Scout 800 and II thru '75 |
| 13332 or T-332 |
Warner Gear T-15D, 3 Speed, Synchro low |
'75 and later |
| 13407 or T-407 |
Chrysler A727 Automatic |
'73 and later |
| 13427 or T-427 |
Warner Gear T-19, 4 Speed Wide Ratio, Synchro Low. |
'75 & on |
| 13428 or T-428 |
Warner Gear T-19, 4 Speed Close Ratio Synchro Low |
'75 & on |
Disclaimer from Howard Pletcher: Years and Models are from memory,
may not be 100% accurate.
Onboard
Air
Home-built
Serious Skid-Plate protection for the Oil Pan for under 20
bucks!
