Main >> Axle >> Factory
Axle I.D. GuideJeep
Factory Axle I.D. Chart
The chart below identifies Dana Axles
used in Jeeps over the years. On all Spicer carrier type
axles the manufacturing date and Bill of Material number are
stamped on the right or left tube for identification and
model number stamped on the casting. You may also find a
Ratio Tag, and a Limited Slip Lubricant Tag bolted to the
differential cover. This information can be used in
conjunction with a Spicer catalog to help identify your axle and
get parts.
|
Jeep
Factory Axle Guide |
|
Axle Model |
Years |
Application Used |
Axle |
Ring Gear |
|
AMC 20 rear |
1976-86 |
CJ,SJ |
29/1.25"/semifloating |
8-7/8" |
|
23-2 rear |
1941-46 |
CJ,GPW,MB |
10/1.00"/full
floating |
7-3/4" |
|
25 front |
1941-65 |
CJ,PU,SW |
10/1.13"/full
floating |
7-3/4" |
|
27 front |
1966-71 |
CJ,SJ(G),VJ |
10/1.13"/full
floating |
7-1/8" |
|
30 front |
1972-86 |
CJ,VJ |
27/1.13"/full
floating |
7-1/8" |
|
30 rear |
1967-68 |
VJ |
27/1.13"/semi-floating |
7-1/8" |
|
35 rear |
1987-97 |
TJ,YJ,XJ |
27/1.13"/semi-floating |
7-9/16" |
|
41-1 rear |
1946-50 |
CJ |
10/1.00"/semi-floating |
7-3/4" |
|
44-2 rear |
1950-70 |
CJ,FC,PU,SJ(G) |
19/1.25"/semi-floating |
8-1/2" |
|
44 rear |
1970-97 |
CJ,FC,SJ(G),SJ,TJ,ZJ |
30/1.31"/semi-floating |
8-1/2" |
|
44F front |
1957-70 |
FC,SJ |
19/1.25"/fullfloating |
8-1/2" |
|
44 front |
1971-86 |
SJ |
30/1.31"/full-floating |
8-1/2" |
|
53 rear |
1957-64 |
FC,PU,SJ(G) |
19/1.19"/semi-floating |
9-3/4" |
|
60 front |
1967-69 |
715 |
10/1.50"/full-floating |
9-3/4" |
Factory Axle Options: These pages cover the axles used in Jeeps over
the years. Front and rear axles are covered with the latest axles used
before the earlier ones.
Factory Front Axles: Front axles used in Jeeps over the years.
Factory Rear Axles: Rear axles used in various Jeeps over the
years.
Onboard
Air
Home-built
Serious Skid-Plate protection for the Oil Pan for under 20
bucks!
