VIAIR Onboard Air Systems, Information and Reviews |
|
|
Viair
325c, 400c & 450c Continuous Duty Compressors
Convert your rig into an on-the-go full-service filling station with
the VIAIR Onboard Air System. The VIAIR Onboard Air System
comes complete with an air compressor, 2 ½ gallon air tank, hosing,
wiring and connectors. As versatile as a Swiss Army Knife,
your VIAIR Onboard Air System inflates tires, fills dinghies, powers
air tools, manages air bag suspensions, and more. Available in
3 performance grades: Medium-Duty, Heavy-Duty and Constant-Duty.
You can mount your VIAIR Onboard Air System almost anywhere with the
included hardware and some minor drilling. VIAIR covers your
Onboard Air System with a 1-year warranty. |
Constant Duty Onboard Air Systems
|
|
By ordering a single part number, you
can take all of the guess-work out of getting all of the parts
you'll need to install one of the most sophisticated, all-inclusive
onboard air systems available today. The Constant Duty Onboard Air
System comes complete with a long-running 450C, 100% Duty Cycle
compressor at its heart that will fill the supplied 2.5 gallon tank
from 110-150 PSI in approximately one minute. Unlike our other
systems, the Constant Duty Onboard Air System can operate for longer
periods of time without needing to rest. Included is everything
you'll need to add a reliable air source to your vehicle as well as
inflate tires with the included clip-on air chuck. (For
vehicles with up to 37-inch tires) |
(1) 2.5
Gallon Viair Air Tank
(1) 450C model Viair Air Compressor
(1) 35ft. Coil Hose
(1) 1/4" Quick Connect Stud (F)
(1) 1/4" NPT Quick Connect Coupler (F)
(1) Dash Panel Gauge with ON/OFF Switch
(1) Pressure Switch with Relay
(110 PSI on, 150 PSI off)
(1) Reducer (1/8" NPT F to 1/4" NPT M)
(1) 1/4" NPT 175 PSI Safety Valve
(1) 1/4" Drain Cock
(3) 1/4" NPT Compression Fittings
(1) 4-inch Strip of Continuous Grommet Material
(1) 20ft. 12 Gauge Wire with Inline Fuse Holder |
Constant-Duty Onboard Air System: This top-of-the-line rig uses
a 450C VIAIR compressor with a 100% duty cycle that fills the 2 ½ gallon
tank in about 1 minute—for tires up to 37” and includes a 35’ coil hose.
The 450H is a continuous duty, hardmount compressor intended to directly
fill tires or other items using a coil hose. The 450H comes with a
built-in, moisture resistant ON/OFF switch. Features include a heavy duty
stainless steel braided leader hose with a ¼” quick connect stud for
hookup to a tank, onboard air system or coil hose and insulated wiring for
simple installation.
450C
Tank
Fill
Rates |
450H
Tire
Inflation Rates |
3
Gallon Tank |
Fill Rate |
0
To 105 PSI |
1
Min. 48 Sec. |
0
To 145 PSI |
2
Min. 50 Sec |
85 To 105 PSI |
27 Seconds |
110 To 145 PSI |
50 Seconds |
|
|
5 Gallon Tank |
Fill Rate |
0
To 105 PSI |
3
Min. 48 Sec. |
0
To 145 PSI |
5
Min. 57 Sec. |
85 To 105 PSI |
49 Sec. |
110 To 145 PSI |
1
Min. 51 Sec. |
|
Begin/End PSI |
31" X 10.5" |
0
To 30 PSI |
4
Min. 05 Sec. |
15 To 30 PSI |
2
Min. 10 Sec. |
|
|
Begin/End PSI |
33" X 12.5" |
0
To 30 PSI |
5
Min. 30 Sec. |
15 To 30 PSI |
2
Min. 50 Sec. |
|
|
Begin/End PSI |
35" X 12.5" |
0
To 30 PSI |
6
Min. 55 Sec. |
15 To 30 PSI |
3
Min. 30 Sec. |
|
400 SERIES STANDARD FEATURES: |
450H Air Compressor |
• Oil-less
Design
• High Performance PTFE Piston Ring
• Stainless Steel Valves
• Moisture &Dust Resistant
• Gearless Direct Drive Motor
• Anodized Aluminum Alloy Cylinder
• Automatic Reset Thermal Overload Protector
• Mounting Plates with Vibration Isolators
• Inline Check Valve
• Remote Mountable Intake Filter Assembly |
• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 100 PSI
• Max. Working Pressure: 150 PSI
• Amp Draw: 19 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 12.75” L x 4.00” W x 7.00” H
• Net Weight: 9.85 lbs. |
Heavy-Duty Onboard Air System: This mid-range system boasts a
400C VIAIR compressor with a 33% duty cycle that fills the 2 ½ gallon tank
in about 45 seconds—for tires up to 35” and comes with 35’ coil hose.
The 400C is a 33% duty cycle compressor that works quickly and efficiently
putting out a massive 2.54 CFM flow at zero PSI head pressure. Features
include a standard ¼” stainless steel braided leader hose with inline
check valve and insulated wiring for simple installation. * Must be used
with a 150 PSI or lower pressure, non-adjustable pressure switch when used
with an air tank.
400 SERIES STANDARD FEATURES: |
400H
Air Compressor General Specs |
•
Oil-less Design
• High Performance PTFE Piston Ring
• Stainless Steel Valves
• Moisture &Dust Resistant
• Gearless Direct Drive Motor
• Anodized Aluminum Alloy Cylinder
• Automatic Reset Thermal Overload Protector
• Mounting Plates with Vibration Isolators
• Inline Check Valve
• Remote Mountable Intake Filter Assembly |
•
12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 33% @ 100 PSI
• Max. Working Pressure: 150 PSI
• Amp Draw: 29 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 11.25” L x 4.00” W x 7.00” H
• Net Weight: 8.00 lbs. |
Medium-Duty Onboard Air System: This entry-level setup uses a
325C VIAIR compressor with a 33% duty cycle that can fill the 2 ½ gallon
tank in about 1 minute—fills tires up to 33”. The 325C are
compressors that work with low amp draw. Features include a standard ¼”
stainless steel braided leader hose with inline check valve and insulated
wiring for simple installation. *Must be used with a 150 PSI or lower
pressure, non-adjustable pressure switch when used with an air tank.
300 SERIES STANDARD
FEATURES: |
325C Air Compressor General Specs |
• Oil-less Design
• High Performance PTFE Piston Ring
• Stainless Steel Valves
• Moisture & Dust Resistant
• Gearless Direct Drive Motor
• Anodized Aluminum Alloy Cylinder
• Automatic Reset Thermal Overload Protector
• Mounting Plates with Vibration Isolators
• Inline Check Valve
• Remote Mountable Intake Filter Assembly |
• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 33% @ 100 PSI
• Max. Working Pressure: 150 PSI
• Amp Draw: 19 Amps
• Min. Ambient Temp: -40° F
• Max. Ambient Temp: 158° F
• Dimensions: 8.00” L x 4.00” W x 7.05” H
• Net Weight: 6.95 lbs.
• Available in Silver or Chrome |
VIAIR
offers the most complete line of air compressors & air accessories for
both the on- and off-road markets available anywhere. VIAIR compressors
and components are used in the OEM segment, 4x4 & Sport Air Suspension,
and have become the industry standard for both 12- and 24-volt automobiles
worldwide.
VIAIR compressors are currently being used in every corner of the Globe,
even in the worlds harshest environments. From the Arctics to the Deserts,
from North America to Europe, Africa, Asia, and even in AustraliaVIAIR is
there.
VIAIR is recognized by its customers and peers alike as the leading
manufacturer of high performance air compressors for mobile pneumatic
needs. Our goal is to deliver consistent performance, reliability and
value to our customers; providing the ultimate Vital Air Source the heart
of any mobile pneumatic system to our valued partners worldwide.