|
Description:
|
The Mile Marker PE6000 Electric Winch: 6000lbs. of pulling power, 3.6hp Permanent Magnet motor, 85' of 5/16" galvanized aircraft grade cable, 12' wired remote switch. Automatic load-holding brake. 2-Year Warranty.
Features:
Your Mile Marker PE6000 Electric Winch comes packed with 6000lbs of pulling power
Powered by a 3.6hp Permanent Magnet motor that directly taps into your truck or SUV’s electrical system
Choose between the 12- or 24-volt version of the Mile Marker Winch to match your vehicle's battery
Comes with a generous 85' spool of 5/16" galvanized aircraft grade cable and roller fairlead
The Mile Marker Electric Winch’s 3-stage planetary drive train and free-spooling actuator deliver fast line speeds with or without a load
Safety features include a 12' wired remote switch and an automatic load-bearing brake system
Your new Mile Marker PE6000 Electric Winch comes with a 2-Year Warranty
Description:
There is no gridlock where there are no paved roads. Spend some time off the beaten track with the mighty Mile Marker PE6000 Electric Winch. It's got the muscle and the features to take you deep into the great outdoors, and get you back home again.
The Mile Marker PE6000 Electric Winch has an impressive 6000lbs. of pulling power, enough to haul you out of just about any predicament. All that torque is generated by the Mile Marker Winch's 3.6hp Permanent Magnet motor, which connects directly to your rig’s 12- or 24-volt battery.
Not just brawny, your Mile Marker PE6000 Electric Winch is fast as well. Its proven 3-stage planetary gear train system makes quick work of even heavy hauls.
To keep you well within anchoring range, your new Mile Marker Electric Winch comes with 85' of 5/16" galvanized aircraft grade cable. And its automatic load-holding break ensures you remain in total control at all times. Comes with a 2-Year Warranty.
Mile Marker PE6000 - 6,000 Lb. Capacity:
6,000 Lb. Capacity.
Roller Fairlead Included.
Water-Resistant Remote Included.
Planetary Gear System for Fast Line Speed.
Automatic Load Holding Brake.
Free Spooling.
Power In and Power Out
3.6hp Permanent Magnet DC Motor!
PE6000 Specs / Part Numbers
Part Number: MIL76-50130
Rated line pull: 6,0000 lbs. (2722 kgs.) single-line
Motor: 3.6 hp, Permanent Magnet
Remote Control: Remote switch, 12' (3.7m) lead
Gear ratio: 210:1
Brake: Automatic Load Holding
Drum diameter/Length: 2.5"/5.512" (63mm/140mm)
Weight: 68 lbs. (31kgs.)
Wire rope: 85', 5/16" diameter
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Winch Dimensions:
17.244" L. x 6.22" D. x 7.283" H.
(438mm L. x 158mm D. x 185mm H.)
Mounting Bolt Pattern:
6.535" x 4.5" (166mm x 114.3mm)
|
