|
Description:
|
Thermometric diagnostics monitor motor temp. WARN 16.5ti Thermometric Self-Recovery Winch: 16500lbs pulling power, 4.6hp Gen II Series Wound motor, 90' of 7/16" aircraft-grade wire rope, 12' wired remote switch. Lifetime Warranty.
Features:
Your new WARN 16.5ti Thermometric Self-Recovery Winch has 16500lbs. of pulling power for heavy-weight vehicles
Thermometric diagnostics measure your WARN 16.5ti Thermometric Self-Recovery Winch's internal temperatures, which display on the remote switch's LCD
Driven by a 4.6hp Gen II Series Wound motor that runs off your truck or SUV’s 12-volt battery
The WARN 16.5ti Thermometric Self-Recovery Winch uses a proven 3-stage planetary gear train, which optimizes power transfer
Comes with an ample 90' of 7/16" aircraft-grade wire rope
A roller fairlead is included with your WARN 16.5ti Thermometric Self-Recovery Winch
Extreme sealing at key points makes the WARN 16.5ti Thermometric Self-Recovery Winch water resistant
Finished with a high gloss, chip resistant powder coating over chromate-coated alloys for heavy-duty corrosion resistance
Your new WARN 16.5ti Thermometric Self-Recovery Winch is made with pride in the USA
Comes with a Lifetime Warranty
Description:
When your colossal rig gets bogged down in a muddy ditch, no scrawny winch will get you moving again. Rely on the WARN 16.5ti Thermometric Self-Recovery Winch’s 16500lbs. of shoulder strength to get your plus-sized truck or SUV out of sticky situations.
Since the WARN 16.5ti Thermometric Self-Recovery Winch was made for heavy hauling, it comes with built in sensors to monitor the temperature in your winch. The LCD screen on your remote switch displays the readings, so you’ll never smoke the 4.6hp Gen II Series Wound motor with an long pull.
Your WARN 16.5ti Thermometric Self-Recovery Winch includes 90' of super-strong 7/16" aircraft-grade wire rope. And its beefed-up design delivers faster line speed to reel your vehicle back onto solid ground without the wait.
The WARN 16.5ti Thermometric Self-Recovery Winch’s extreme sealing locks water out of critical area. And its chip-resistant powder coat finish bars corrosions. Comes with a Lifetime Warranty.
Detailed Information:
16.5ti SPECS/PART NUMBERS
Part Number: PN 68801 CE (12V DC)
Rated Line Pull: 16500 lbs. (7484 kgs.) single-line
Motor: 12V 4.6 hp, Gen II, Series Wound
Remote Control: Remote switch, ti, 12' (3.7m) lead
Geartrain: 3-Stage Planetary
Gear Ratio: 315:1
Lubrication: Molybue: #1 or Aeroshell #17
Clutch (freespooling): Rotating Ring Gear
Brake: Automatic Direct Drive Cone
Wire Rope: 90', 7/16" diameter (27m, 11mm diam.)
Fairlead: Roller
Recommended Battery: 650 CCA minimum for winching
Battery Leads: 2 gauge, 72" (1.83m)
Finish: Chromate with high-gloss dark gray powder coat
Drum Diameter/Length: 3.5"/8.2" (9cm/21cm)
Weight: 138 lbs. (63 kgs.)
|
;)
;)
