|
Reviews
|
Views
|
|
1
|
238854
|
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
None indicated
|
7.0
|
|
|
|
|
|
|
|
Description:
|
Fozzy Locker
Fozzy locker is a twist to the standard Lincoln Locker. Apparently made popular by a guy named Fozzy. The Fozzy Locker is a cheap, removable version of the "Lincoln Locker" where the teeth of the side gears of the spider gear set are partially filled by welding material.
Some people who have created a Fozzy locker weld up the valley between 2 adjacent teeth on the side gears as pictured to the right. Welds are done 180° apart. Both side gears are done this way. The valley between the teeth are then fill until flush with the top of the teeth and ground flat. Some people say there are a couple advantages to the fozzy Locker. By only doing the two valleys it allows the side gears to still rotate partially before locking. The gears that are being welded are the same gears that are replaced when a drop in a "lunch box locker" so if it doesn't work out as you hoped or if you damage a side gear, it can be replaced by one of several drop-in lockers such as a Lock Rite or a Detroit EZ Locker. Ultimately this type of locker will not ratchet (disengage) around corners as a an automatic locker would would and can be hard on the stock open carrier especially when a wheel spins and hits the weld placing a large amount of shock on the stock carrier.
|
|
Keywords:
|
Fozzy Locker
|
|
|
|
|
Anonymous
|
|
Review Date: Tue October 14, 2008
|
Would you recommend the product? Yes |
Price you paid (per item)?: None indicated
| Rating: 7
|
|
Pros:
|
Replaceable back to stock
|
|
Cons:
|
mega force on stock carrier
|
|
Limited success with mine. Worked ok for about a year until I cracked the carrier. While it was intact, it was predicatable. Had to tweak my welds twice. Carrier finally gave up. Luck it didn't explode.
|
|
|
|
|
OX Heavy Duty U-joints
Editor
|
|
|
