|
Description:
|
The Mile Marker HI9000 Hydraulic Winch: 9000lbs. of pulling power, 14ci hydraulic motor, 100' of 3/8" aircraft grade cable, 12' wired remote switch. All-weather sealing. 2-Year Warranty.
Features:
With 9000lbs. of brute pulling power, your new Mile Marker HI9000 Hydraulic Winch has plenty of backbone for even the most grueling hauls
Powered by a mighty 14ci hydraulic motor that taps into your power steering pump for cooler, long-lasting pulls
The Mile Marker Hydraulic Winch uses an integrated solenoid directional control valve instead of a remote solenoid
Mile Marker's pioneering hydraulic design meets all the exacting demands of the US Military, and is used on the Humvees that transport our fighting men and women across foreign soil
Completely sealed from the elements with a corrosion resistant finish
Even fully submerged in water, your Mile Marker Hydraulic Winch will work flawlessly
Uses a 2-speed, free-spooling planetary gear train for fast line pulls with or without a load
The Mile Marker HI9000 Hydraulic Winch comes with a generous 100' spool of 3/8" galvanized aircraft grade cable and a roller fairlead
Comes with all the hoses and adaptors to fit the Mile Marker Winch into your rig's power steering pump
Backed by a 2-Year Warranty
Description:
Don't let little obstacles like mud bogs, raging rivers or craggy ravines intimidate your rig. With the Mile Marker HI9000 Hydraulic Winch riding along, you'll stop being stranded on the sidelines and start getting in on the action.
Your Mile Marker HI9000 Hydraulic Winch's 9000lbs. of pulling power comes from its ingenious design. Rather than running off batteries, it uses a 14ci motor that connects right to your power steering pump, which has tons of potential power just sitting in its lines.
The strength, reliability and dependability of your Mile Marker Winch's technology make it the only choice for the US Military. Mile Marker proudly rides along with our brave soldiers on their Humvees.
Handle anything that Mother Nature can dish out with Mile Marker Hydraulic Winch's extreme weather sealing. It'll even pull its full load while under water.
You get a 2-Year Warranty along with your Mile Marker HI9000 Hydraulic Winch.
Features:
Freespooling
Power IN/OUT
Mechanical Lock
Sealed against the elements
Can use underwater
Corrosion resistant
Stainless Steel Tie Bars and Fasteners
Reversible mounting
Specifications:
Part Number: 75-50085C
Rated Line Pull (single line): 9,000 lbs. @ 1500 PSI
Gear Train: Planetary
Gear Ratio: 6:1 (low gear), 1:1 (high gear)
Motor: 14 C.I. Hydraulic
Directional Control: 12V Solenoid 3 way
Valve: Integrated (maximum rated flow 3.5 gpm) draws 2 amps
Control Switch: Remote Switch, 12' lead
Hoses: 2 hoses (5' and 7') Steel Braid High Pressure, 3,000 PSI rating. Use size 6 JIC swivel female on both ends.
Cable: 3/8" x 100' (14,400 nominal)
Drum Size Diameter: 2.5" (6.4cm)
Drum Size Length: 9" (23cm)
Weight: 97 lbs.
|
