Reviews
|
Views
|
6
|
1161739
|
Recommended By
|
Average Price
|
Average Rating
|
67% of reviewers
|
None indicated
|
2.3
|
|
|
|
|
|
Description:
|
I built this buggy using a Dana 44 front and 12 bolt GM rear full size Chevy axles which I narrowed 21 inches, welded the spider & side gears to lock them up then shaved the housings for maximum clearance.
Next I bought a 1980 Honda Civic with a 1.3 litre engine and automatic transmission. I pulled the transmission apart and welded the spider & side gears in the differential of the transmission to lock the axles together and reassembled the transmission.
I set the engine/transmission, axles, rad, etc. in position on stands with the engine turned 90 degrees so the engine sits just forward of the rear axle with the transmission ahead of it.
When I narrowed the axles I took more out of the right rear and left front so the pinions would be aligned to the right.
For my next step I built a frame around all this with 2" square tubing and bolted the axles directly to the frame with U-bolts.
Drive shafts were easy to make. I just found some pipe which fit tightly over the Honda axles, made a couple rings. Tapped them over the axles then ground them down till they fit into the Chevy yolks, slid them in and welded them solid.
For the steering I used the Honda steering colunm complete with ignition switch and a VW bug steering box.
The feature which makes this buggy unique is that by using a front wheel drive transaxle the torque is multiplied through the differential in the transmission before it goes to the axles creating extra low gearing. We chained this buggy to a tree and while sitting on dry pavement it will actually spin all four 33" tires at a rate of about 3MPH. Top end is about 30MPH at about 6500rpm (honest that old Civic motor screams)
Peter Bonenfant
|
Location
|
North Bay, Ontario Canada
|
|
|
|
Anonymous
|
Review Date: Wed February 14, 2007
|
Would you recommend the product? Yes |
Price you paid (per item)?: None indicated
| Rating: 3
|
Pros:
|
Ummm....
|
Cons:
|
errr...
|
|
Why???
|
|
Anonymous
|
Review Date: Thu February 22, 2007
|
Would you recommend the product? Yes |
Price you paid (per item)?: None indicated
| Rating: 1
|
Pros:
|
Nice cargo rack
|
Cons:
|
you get the crazy award
|
|
If you when to all that trouble, why didn't design a tube buggy or at least put some kind of roll cage around the driver? Looks like a heavy, suspensionless death trap.
|
|
Anonymous
|
Review Date: Mon February 26, 2007
|
Would you recommend the product? Yes |
Price you paid (per item)?: None indicated
| Rating: 0
|
|
mudflaps wouldn't hurt
|
|
Anonymous
|
Review Date: Sat April 21, 2007
|
Would you recommend the product? No |
Price you paid (per item)?: None indicated
| Rating: 1
|
Pros:
|
..... not sure.... kinda fun to drive... maybe...
|
Cons:
|
everything
|
|
....uuuhhh, why not just buy a Quad???
|
|
Anonymous
|
Review Date: Mon June 30, 2008
|
Would you recommend the product? Yes |
Price you paid (per item)?: None indicated
| Rating: 0
|
Pros:
|
like ur home made visors
|
Cons:
|
|
|
looks like something you would get ur ass killed on
|
|
Anonymous
|
Review Date: Mon June 30, 2008
|
Would you recommend the product? No |
Price you paid (per item)?: None indicated
| Rating: 4
|
Pros:
|
like ur helmet ad on
|
Cons:
|
|
|
looks like something u could get ur ass killed on in no time
|
|
|
|
|
Rob Cavaleri's 1978 International Harvester Scout II Editor
|
|
|