Rust Prevention and Rust Treatment By Eastwood Company
Protect your Vehicle from Rust and Corrosion with
these and other Quality Rust Prevention Items from Eastwood!
Get
Rid of the Rust!
Stop rust in its tracks
with Eastwood's
Rust Encapsulator. Rust Encapsulator chemically reacts with rust
to form a hard, durable coating - halting the further spread of rust!
Follow these simple steps to halt further corrosion and spread of rust
with Rust Encapsulator:
- Remove any loose
rust with a wire brush.
- Be sure your surface
is grease and oil free (Eastwood's PRE
Painting Prep works great!)
- Paint or spray
Rust
Encapsulator to the prepped area. Rust Encapsulator can be thinned
20% with laquer thinner to spray, and also comes in convenient aerosol
cans.
- Allow to dry for
6-8 hours. (You can apply 2 coats - wait 2-3 hours between coats.)
- Topcoat is not
required, but can be applied after 6-8 hours, if desired.
Paint-on Rust Encapsulator
comes in pint, quart, and gallon sizes. One quart will double-coat up
to 50 feet, while the gallon covers a whopping 200 feet with a double-coat.
Aerosol
cans are also available for hard-to-reach areas. Available in red,
black,
and silver,
Rust Encapsulator looks great even without a topcoat. Eastwood's Rust
Encapsulator is the best on the market - proven
to be superior in sunlight resistance, preventing rust creep,
and overall durability.
Get
Eastwood's
Rust Encapsulator and get rid of the rust!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offroaders.com, 4 Crozerville Road, Aston, PA 19014, USA |
|
|
|
|
|
|
|
|
The Material contained within this
web site, www.offroaders.com,
may not be reproduced, copied, re-posted or
presented in any other media without the prior
written approval of the author or original
photographer. © 1998-2006 All Rights Reserved. |
|
| |
|
|